ABSTRACT
Objective:To explore the macroporous resin adsorption and the membrane separation technologies for the purification of saponins water extract of Anemarrhena asphodeloides. Methods:Ten-fold amount of water was used to extract twice for 120 min each time to extract saponins from Anemarrhena asphodeloides. The macroporous resin adsorption(HP-20,HPD-600,D101,AB-8) and the membrane separation technologies (ceramic microfiltration membranes 0.8 μm and 0.05 μm, and hollow fiber ultrafiltration mem-branes 50,10 and 6 kDa) were adopted to purify the saponins water extract liquid. The physicochemical parameters including electri-cal conductivity,viscosity and turbidity were measured,as well as the contents of total saponins,proteins and polysaccharides were de-termined. Results:The viscosity and turbidity decreased,the value of pH increased and the electrical conductivity of the saponins puri-fication liquid changed irregularly after the membrane filtration. The microfiltration membrane was more advantageous than the ultrafil-tration membrane in removing macromolecular substances. The smaller the pore diameter of microfiltration membrane, the smaller the intercepted molecular weigh,the higher the removal ratio of proteins and the higher the penetration rate of the total saponins,while the polysaccharides content was stable, which was consistent with the results of physicochemical parameters. The ceramic microfiltration membrane could obtain clearer extract,while the ultrafiltration membrane was more suitable for the enrichment of saponins when the in-tercepted molecular weight was 6 kDa. The macroporous resin HPD-600 was the best for the purification of timosaponin water extraction liquid.Conclusion:The selection of membrane for the separation and purification of different substances is particularly important. The change of physicochemical parameters and the content decrease of macromolecular substances have obvious corresponding relationship. Ultrafiltration membrane is better than microfiltration membrane for the purification of timosaponin water extract liquid.
ABSTRACT
Objective:To explore the effect of different separation and purification technology on the physical and chemical proper-ties of water extract of ophiopogonin. Methods:The water extraction process of total ophiopogon saponins was optimized by an orthogo-nal test. The macroporous resin adsorption and membrane separation technology were adopted to purify the ophiopogonin water extract. The physical and chemical parameters, such as electrical conductivity, pH value, viscosity and turbidity, and the contents of total sap-onins, proteins, tannins and polysaccharides were determined. Results:The optimum water extraction technology of total saponins was as follows:6-fold amount of water was added, boiling 3 times with 90 min for each time. The electrical conductivity, pH value and vis-cosity of different purified liquid of total saponins had no significant differences, while the contents of total saponins and the three kinds of macromolecules showed significant differences. Conclusion: The content of macromolecules can be used as the reference index of purification process of total saponins water extract. Compared with macroporous resin separation, membrane separation technology is more suitable for the separation and purification of total saponins water extract.
ABSTRACT
To optimize the water extraction process for glycyrrhiza. Methods: HPLC was used to determine the con-tents of glycyrrhizic acid and liquiritin. The comprehensive index included the contents of glycyrrhizic acid and liquiritin and the yield of dry extract. The water amount and the extraction time were selected as the independent variables, and the comprehensive index was set as the dependent variable. Design-expert 8. 06 software was used to fit multivariate linear or quadratic multinomial models for the experimental values. Response surface methodology was used to optimize the water extraction process. The prediction was carried out through comparing the observed and predicted values. Results:The regression coefficient of binomial fitting complex model was as high as 0. 979 7. The optimum conditions of extraction process were as follows:12-fold amount of water, extracting 3 times with 90 min for each time. The deviation between the observed and predicted values was -1. 72%. Conclusion: Central composite design-response surface methodology is convenient and highly predictive in optimizing the water extraction process for glycyrrhiza, which can be applied in the further membrane separation and purification.
ABSTRACT
Objective:To carry out all aspects of medical equipment quality control work, solid implementation of medical equipment quality control testing, accurately grasp the quality evaluation of controlled medical equipment, improve the quality of medical equipment and security application.Methods: From the grasp of the controlled object information, careful planning, coordinating the implementation of a variety of ways to carry out the control, medical equipment quality control.Results: The controlled medical equipment to ensure a reliable detection rate reached 100%, the application of medical equipment quality.Conclusion: Overall quality control of medical equipment can effectively solve the practical difficulties, to avoid detection of controlled equipment, the full implementation of the quality control of medical equipment.
ABSTRACT
The e -procurement definition of the medical equipment is introduced from mainly aspects and correlated details,and e-procurements strategies and the concrete methods and actions for ensuring quality in the medical equipment are expatiated.
ABSTRACT
In order to make the best of the medical equipment and avoid repetitive purchase,our hospital establishes a medical equipment communion-center,the section offices of which are responsible for keeping the occasionally-used but indispensable equipment.The equipment managed by the Medical Affairs Office and the Medical Engineering Office could be lent to any section offices in the hospital,thus not only facilitating medical treatment but reducing expenses.